13
TROUBLESHOOTING
WARNING
• Turn the switch to the “OFF” position and remove the battery pack from the impact wrench
before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The impact wrench
does not work.
The battery pack is
depleted.
Charge the battery pack.
The socket cannot be
installed.
The socket does not t the
sleeve.
Use a suitable adapter or claimed
capacity socket.
The motor is
overheating.
Be sure cooling vents are
free of dust and obstacles.
Clean and clear the vents. Do not
cover the vents with your hand during
operation.
The LED worklight
blinks rapidly.
The tool has stopped
working to protect internal
circuits.
Release the trigger switch, wait for
the tool to cool down, then and start
the tool again.
The LED worklight
blinks slowly.
The battery charge is very
low.
Charge the battery.
WARRANTY
5 Year Limited Tool Guarantee
For 5 years from the date of purchase, the impact wrench is warranted for the original
purchaser to be free from defects in material and workmanship. This guarantee does not
cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized
repair/alteration, or expendable parts and accessories expected to become unusable after a
reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Printed in China
To Next Page
Loading...
Need help?
General
