Kobalt KHB 4124B-03 - Operating Instructions; To Start;Stop the Blower; Hanging Hole

10
OPERATING INSTRUCTIONS
1. To Start/Stop the Blower
The variable-speed trigger switch (C) can turn the
blower ON/OFF and deliver variable speed. The
blower is also equipped with a trigger-lock lever (B)
to turn the blower ON/OFF, and lock the blower at a
certain speed.
To Turn the Blower ON
a. To turn the blower ON, depress the variable-
speed trigger switch (C).
b. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
c. To lock the blower on a certain speed, move the
trigger-lock lever (B) toward the back of the tool.
d. The trigger-lock lever can also be pulled back to start the blower without needing to rst
depress the variable-speed trigger switch. The blower runs at higher speeds as the lever is
moved further back.
To Turn the Blower OFF
a. If the trigger-lock lever (B) is not engaged, release the variable-speed trigger switch (C).
b. If the trigger-lock lever is engaged, move the trigger-lock lever forward to the unlocked
position.
2. Hanging hole
The blower is equipped with a hanging hole (D).
The blower can be hung from a screw or nail for
storage.
3
B
C
4
D