S
Susan WilliamsJul 27, 2025
What to do if Kobalt KST 120X-06 motor fails to start?
- JJoseph AlvarezJul 28, 2025
If the Kobalt Trimmer motor doesn't start when you depress the switch trigger, there are several potential causes: 1. The battery may not be secure. Ensure that the latches on the battery compartment snap into place to properly secure the battery. 2. The battery may not be charged. Charge the battery fully, following the charging instructions specific to your model. 3. There could be a wiring or electrical contact problem. In this case, it is recommended to contact technical service at 1-888-3KOBALT (1-888-356-2258) for assistance.