EasyManua.ls Logo

Kobalt KST 130X-06 - User Manual

Kobalt KST 130X-06
19 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
AB16499
40 V STRING TRIMMER
ITEM #0796787
MODEL #KST 130X-06
Español p. 20
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date

Table of Contents

Questions and Answers

  • J
    Jenny ReyesJul 27, 2025
    Why Kobalt KST 130X-06 motor fails to start?
    • J
      Jennifer KennedyJul 27, 2025
      If the Kobalt Trimmer motor doesn't start when you depress the switch trigger, there are a few potential reasons. First, ensure the battery is securely in place by checking that the latches on the battery compartment snap into place. Second, the battery may not be charged, so charge it according to the instructions included with your model. If these steps don't work, there may be a wiring or electrical contact problem.
  • S
    Sandra ManningAug 3, 2025
    What to do if Kobalt KST 130X-06 Trimmer head will not advance line?
    • R
      rwrightAug 3, 2025
      If the Kobalt Trimmer head won't advance the line, it could be due to several reasons. First, the motor shaft or trimmer head may be bound with grass; if so, stop the trimmer, remove the battery, and remove any grass. Second, there might not be enough line in the spool. Third, the trimmer head could be dirty, so remove the battery and clean the spool. Finally, the line could be tangled on the spool; in that case, remove the battery, remove the line from the spool, and rewind it.
  • T
    Theodore KennedyAug 11, 2025
    Why is the Kobalt KST 130X-06 line not cutting well?
    • C
      Christopher CraneAug 11, 2025
      If the line on your Kobalt Trimmer isn't cutting well, it's likely that the cutting blade on the guard has become dull. Sharpen the cutting blade with a file or replace it with a new blade.
  • R
    rmorenoAug 18, 2025
    What to do if Kobalt KST 130X-06 smokes during operation?
    • T
      Terri JohnsonAug 18, 2025
      If your Kobalt Trimmer smokes during operation, it means that the trimmer is damaged. Stop using the string trimmer immediately.

Summary

Package Contents Overview

Hardware Contents List

Product Symbols and Designations

Understanding Safety Signal Words

Explains signal words like DANGER, WARNING, CAUTION and their meanings.

General Safety Information

Product Preparation Steps

Assembly Instructions Guide

Installing the Safety Guard

Steps for installing the protective guard onto the trimmer head.

Assembling the Front Handle

How to position and secure the auxiliary handle onto the upper tube.

Connecting Upper and Lower Tubes

Procedure to connect the upper and lower trimmer sections.

Cutting Line Spool Handling

Instructions for removing, replacing, or refilling the cutting line spool.

Battery Installation and Removal

Steps for inserting and removing the battery from the trimmer.

Adjusting the Cutting Swath Width

How to change the cutting swath width by adjusting the cutter blade.

Operating Your String Trimmer

Trimmer Start and Stop Procedures

How to turn the string trimmer on and off using the controls.

Advancing the Cutting Line

How to feed more cutting line using the bump feed feature.

Care and Maintenance Guide

Trimmer Guard and Motor Cleaning

Steps for cleaning the trimmer guard, motor cover, and connection joints.

Spool and Line Inspection

Check the spool for adequate line and any damage to the cap.

Troubleshooting Common Issues

Product Warranty Information

Replacement Parts List

Kobalt KST 130X-06 Specifications

General IconGeneral
TypeString Trimmer
Power SourceBattery
Voltage40V
Cutting Width13 inches
Line FeedAutomatic
Attachment CapableNo
Battery TypeLithium-Ion
Battery IncludedYes
Charger IncludedYes
Variable SpeedYes
Adjustable HandleYes
Line Diameter0.08 inch

Related product manuals