To Next PageTo Next PageWhat to do if the Kobalt Trimmer motor runs, but the string head does not move?
What to do if the Kobalt Trimmer motor runs, but the string head does not move? Stop using the string trimmer. The trimmer may be damaged. Call 1-888-3KOBALT (1-888-356-2258) for technical service.
Why Kobalt Trimmer motor fails to start?
If the Kobalt Trimmer motor doesn't start when you press the switch trigger, it could be due to the following reasons: * The battery may not be securely in place. Ensure that the latches on the battery compartment snap into place. * The battery may not be charged. Charge the battery following the instructions provided with your model.
What to do if Kobalt KST 140XB-06 Trimmer smokes during operation?
What to do if Kobalt Trimmer smokes during operation? If the trimmer is smoking, stop using it immediately. The trimmer may be damaged. Contact technical service at 1-888-3KOBALT (1-888-356-2258) for assistance.
Step-by-step guide for installing the trimmer's protective guard.
Instructions for attaching and positioning the auxiliary front handle.
Procedure for connecting the trimmer shaft to the power head.
Information on the trimmer's cutting line and how to manage it.
Detailed steps for removing and installing new trimmer line.
Guide on how to take out used or tangled trimmer line from the spool.
Steps for detaching the trimmer line spool from the cutting head.
How to change the trimmer's cutting width from 14 to 16 inches.
Instructions for inserting and removing the battery pack.
Steps for connecting a shoulder harness to the trimmer.
How to power the string trimmer on and off using its controls.
Using the bump feed mechanism to advance trimmer line.
How to select between high and low speed settings on the trimmer.
Guidance on proper techniques and conditions for using the string trimmer.
How to clean and maintain the trimmer's guard and motor.
Procedures for cleaning the line cutter blades and inspecting the spool.
General