To Next PageTo Next PageWhy is my Kobalt KWDV 0124B-03 not working?
If your Kobalt Vacuum Cleaner isn't working, it could be due to a low battery. Try charging the battery pack. Alternatively, the battery pack or the vacuum itself might be too hot. In this case, turn off the vacuum and allow both the vacuum and battery pack to cool down before attempting to use it again.
What to do if the Kobalt Vacuum Cleaner air velocity decreases?
If the air velocity of your Kobalt Vacuum Cleaner decreases noticeably, it's likely that the air inlet is blocked by debris. To resolve this, remove the battery pack and clear any debris that's obstructing the inlet.
Read the manual and labels before using the tool for future reference.
This tool should be serviced only by a qualified service technician.
Basic precautions to follow when using an electrical appliance.
Guidelines for maintaining a safe and clean work environment.
Precautions to prevent electric shock hazards.
Advice on staying alert and using common sense while operating the appliance.
Instructions for proper operation and maintenance of the appliance.
Guidelines for safely using and maintaining battery packs.
Information on servicing the appliance by qualified technicians.
Specific safety advice, including handling batteries and charger.
Understanding the vacuum's capabilities and safety requirements before use.
Steps for attaching and detaching the battery pack to the tool.
Instructions for removing, cleaning, and installing the filter.
How to attach the hose for debris pickup or blower operation.
Procedure for turning the vacuum on and off using the switch.
Steps for performing wet pickup and emptying the tank.
Explanation of the float mechanism that shuts off suction when the tank is full.
Instructions for using the vacuum as a blower.
Guidelines for cleaning the vacuum using a soft, dry cloth.
Instructions for storing the vacuum indoors and away from chemicals.
Warning regarding the use of recommended accessories and battery removal.
Possible causes and corrective actions for the tool not working.
Troubleshooting steps when air velocity is reduced due to blocked inlets.
Read the manual and labels before using the tool for future reference.
This tool should be serviced only by a qualified service technician.
Basic precautions to follow when using an electrical appliance.
Guidelines for maintaining a safe and clean work environment.
Precautions to prevent electric shock hazards.
Advice on staying alert and using common sense while operating the appliance.
Instructions for proper operation and maintenance of the appliance.
Guidelines for safely using and maintaining battery packs.
Information on servicing the appliance by qualified technicians.
Specific safety advice, including handling batteries and charger.
Understanding the vacuum's capabilities and safety requirements before use.
Steps for attaching and detaching the battery pack to the tool.
Instructions for removing, cleaning, and installing the filter.
How to attach the hose for debris pickup or blower operation.
Procedure for turning the vacuum on and off using the switch.
Steps for performing wet pickup and emptying the tank.
Explanation of the float mechanism that shuts off suction when the tank is full.
Instructions for using the vacuum as a blower.
Guidelines for cleaning the vacuum using a soft, dry cloth.
Instructions for storing the vacuum indoors and away from chemicals.
Warning regarding the use of recommended accessories and battery removal.
Possible causes and corrective actions for the tool not working.
Troubleshooting steps when air velocity is reduced due to blocked inlets.
General| Model | KWDV 0124B-03 |
|---|---|
| Tank Capacity | 12 Gallons |
| Voltage | 120 V |
| Hose Length | 7 ft |
| Included Accessories | Extension wands, utility nozzle, crevice nozzle, cartridge filter |
| Filter Type | Cartridge |
