8.5
Please read and understand this entire manual before attempting to assemble, operate
or maintain this product. If you have any questions, please call our Customer Service
Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m. EST, Monday – Friday.
Improper operation or maintenance of this tool could result in serious injury and
property damage. Read and understand all warnings and operation instructions
before using this tool. When using any tool, basic safety precautions should always
be followed to reduce the risk of personal injury. Use each tool for its intended
function only. Do not use this product in unsafe work conditions. It is always
recommended to keep a fire extinguisher and first aid kit near work areas.
Some dust created by paint spraying, power sanding, sawing, grinding, drilling and
other related activities is known to the State of California to cause cancer, birth
defects and other reproductive harm. A listing of chemicals can be obtained from
www.oehha.ca.gov under proposition 65.
Some examples of these chemicals are:
• Lead from lead based paints
• Crystalline silica from bricks, cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well ventilated area
and wear appropriate/approved safety equipment such as respirators or dust masks
which are specially designed to filter microscopic particles.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD
RESULT IN INJURY OR DEATH.
To Next Page
Loading...
Need help?
General
