This air powered tool is capable of
propelling materials such as fasteners,
metal chips, sawdust and other debris at
high speed which could result in serious
injury.
Always wear ANSI approved Z87.1
safety glasses with side shields.
Never leave a pressurized tool unattended.
Disconnect tool from air supply when tool
is not in use or when changing accessories
to prevent accidental operation.
Compressed air can be hazardous,
propelling objects or particles that can
cause injury into soft tissues such as
eyes and ears.
Never direct air at yourself or anyone else.
For additional protection, use an approved
face shield in addition to safety glasses.
Tool attachments can become loose
or break and fly apart, becoming
projectiles or propelling other objects
at the operator or bystanders in the work
area.
Make sure all attachments are properly
assembled and securely fastened before
use.
Always use the tool at a safe distance
from others in the work area. Maintain
awareness of work area safety at all times.
Exposure to noise produced by air tools
can lead to permanent hearing loss.
This tool is capable of generating sparks
which can result in ignition of flammable
materials.
Work in a clean, well ventilated area
free of combustible materials.
Never operate tools near flammable
substances such as gasoline, naphtha,
cleaning solvents, etc.
This tool is not recommended for use in
explosive atmospheres or underwater.
Never use oxygen, carbon dioxide or
other bottled gasses as a power source
for air tools. Use only clean, dry air at
the specified pressure.
Wiping or cleaning rags and other
flammable waste materials that may have
been used on the tool must be placed in
a tightly closed metal container, and
disposed of in a proper manner.