2
MOTOR CUTTING CAPACITY
Power Source 10A, 120V A/C, 60 Hz Crosscut 2 in. x 8 in.
Arbor Shaft Size 5/8 in. Miter 45° Right & Left 2 in. x 6 in.
Speed (No load) 5,000 RPM Bevel 45° Left 1-1/2 in. x 8 in.
Electric Brake Yes 45° Miter & 45° Bevel 1-1/2 in. x 6 in.
Double Insulated Yes Crown Moulding Nested 3-3/8 in.
BLADE Base Moulding Against Fence 2-3/8 in.
Diameter 7-1/4 in. MITER/BEVEL POSITIVE STOP ANGLES
Arbor 5/8 in. Miter Range 0° ~ 50° right and left
Tooth thickness 0.087 in. Miter Detent Stops
0°, 15°, 22.5°, 31.6°,
45° right and left
Bevel Range 0° ~ 47° left
Bevel Positive Stops 0°, 45° left
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
Product Specications.............................................................................................................. 2
Package Contents..................................................................................................................... 3
General Power Tool Safety Warnings........................................................................................ 4
Safety Information..................................................................................................................... 9
Preparation............................................................................................................................... 11
Assembly Instructions.................................................................................
......
........................ 13
Adjustment Instructions............................................................................................................. 15
Operating Instructions............................................................................................................... 26
Crown Moulding Chart.............................................................................................................. 37
Care and Maintenance.............................................................................................................. 38
Troubleshooting........................................................................................................................ 40
Replacement Parts List............................................................................................................ 41
Warranty.................................................................................................................................... 44
To Next Page
Loading...
