Why has my Kobra Paper Shredder shredding capacity significantly reduced?
A significant reduction in your Kobra Paper Shredder's shredding capacity typically means the cutting knives need oiling. Manually oil the cutting knives. If your model has an automatic oiler, replace the empty container with a full one.
What to do if my Kobra 310TS does not start?
If your Kobra Paper Shredder isn't starting, several factors could be the cause. First, ensure the switch is not in the OFF position; if it is, press the switch to turn it on. Check that the power cable is correctly plugged into the power socket and that the socket is switched on. Also, make sure the lid is closed properly and that the bag is not full. Finally, if the motor is overheated, allow it to cool down for 15 minutes before attempting to use it again.
What to do if my Kobra Paper Shredder never stops?
If your Kobra Paper Shredder never stops, it's likely due to material or dirt deposited on the photo cells. Remove any deposits from the photo cells to resolve this issue.
Instructions on when to disconnect the power plug from the machine for safety.
Observe warning labels and prohibition of child operation for safety.
Information on continuous and limited run times based on voltage.
Details the touch screen control panel and its functions like Forward, Stop, Reverse, and Oil.
Explains how to use the shredder, including auto-standby and energy saving.
Diagnoses and solutions for when the shredder fails to start.
General| Brand | Kobra |
|---|---|
| Model | 310TS |
| Category | Paper Shredder |
| Language | English |
To Next Page
