EasyManua.ls Logo

Kobra 400 HS6-COMBI - User Manual

Kobra 400 HS6-COMBI
14 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
LIBRETTO D'ISTRUZIONI
OPERATING INSTRUCTIONS
BETRIEBSANLEITUNG
INSTRUCCIONES DEMANEJO
MODE D'EMPLOI
Distruggi documenti
Paper shredder
Schriftgutvernichter
Destructora de documentos
Destructeur de docum
ents
KOBRA 400 HS Automatic Oiler
KOBRA 400 HS-6 Automatic Oiler
KOBRA 400 HS-OM Automatic Oiler
KOBRA 400 HS-COMBI Automatic Oiler
KOBRA 400 HS6
-
COMBI Automati
c
Oiler
http://www.monomachines.com/
http://www.monomachines.com/

Questions and Answers

  • D
    David WeaverAug 8, 2025
    Why is there a significant reduction in shredding capacity in my Kobra Paper Shredder?
    • S
      Sarah GarciaAug 8, 2025
      A significant reduction in shredding capacity in your Kobra Paper Shredder is caused by the oil in container (P) running out. Replace the oil container (P).
  • F
    fadamsAug 18, 2025
    What to do if my Kobra 400 HS6-COMBI Paper Shredder does not start?
    • M
      mannamandaAug 18, 2025
      If your Kobra Paper Shredder isn't starting, here are a few things to check: * Ensure the button is in the 'I' position. * Make sure the lid is completely closed. * Empty the bag if it's full. * Give the motor 15 minutes to cool down if it's in heat protection mode. * Verify the shredder is properly plugged into the power socket and that the socket is switched on.
  • P
    Patrick LarsonAug 29, 2025
    Why does my Kobra 400 HS6-COMBI never stop?
    • S
      Shelby BrownAug 29, 2025
      If your Kobra Paper Shredder is continuously running, it might be due to material or dirt on the photo cells. Remove any deposits from photo cells (5) or (5a).

Summary

General Safety Warnings

Electrical and Fire Precautions

Important warnings regarding electrical supply, fire hazards, and safe operation of the shredder.

Product Specifications and Operation

Installation

Instructions for setting up the shredder, including power connection and bag unit placement.

Machine Operation

Details on starting the machine, shredding paper, and handling optical media.

Automatic Functions and Systems

Explanation of automatic start, auto-stop, energy saving, and automatic oiling features.

Care and Maintenance

Guidance on checking oil levels and general upkeep for the shredder's longevity.

Accessories

Information on available accessories, specifically the printout shelf.

Troubleshooting Guide

Shredder Not Starting

Diagnosing issues when the shredder fails to power on or respond to input.

Shredder Never Stops

Addressing problems where the shredder continues to run unexpectedly.

Reduced Shredding Capacity

Troubleshooting a significant decrease in the machine's shredding performance.

Technical Specifications Table

Model and Cutting Specifications

Detailed table of specifications including model, throat width, cutting capacity, power, and voltage.

Kobra 400 HS6-COMBI Specifications

General IconGeneral
Cut TypeCross Cut
Security LevelP-4
Power Supply230 V
Sheet Capacity6 sheets (70 g/m²)
Shredding Speed0.18 m/sec
Noise Level55 dB
Security Level DIN 66399P-4
Sheet Capacity (low)6 sheets (70 g/m²)
Shreddable MaterialsPaper, Credit Cards, CDs/DVDs
Speed0.18 m/s

Related product manuals