Why is there a significant reduction in shredding capacity in my Kobra 400 HS?
A significant reduction in shredding capacity in your Kobra Paper Shredder is caused by the oil in container (P) running out. Replace the oil container (P).
What to do if my Kobra 400 HS Paper Shredder does not start?
If your Kobra Paper Shredder isn't starting, here are a few things to check: * Ensure the button is in the 'I' position. * Make sure the lid is completely closed. * Empty the bag if it's full. * Give the motor 15 minutes to cool down if it's in heat protection mode. * Verify the shredder is properly plugged into the power socket and that the socket is switched on.
Why does my Kobra 400 HS Paper Shredder never stop?
If your Kobra Paper Shredder is continuously running, it might be due to material or dirt on the photo cells. Remove any deposits from photo cells (5) or (5a).
Diagram illustrating the control panel layout and its components for Kobra shredders.
Details on Kobra 400 HS models, including operation, automatic functions, and accessories.
Guidance on maintaining the automatic oiler system and checking oil levels.
Solutions for common problems such as the shredder not starting or stopping.
General| Shred Capacity | Up to 400 sheets |
|---|---|
| Weight | 85 kg |
| Sheet Capacity | 400 sheets |
| Throat Width | 400 mm |
| Power Supply | 230 V |
| Material Shred | Paper, credit cards, CDs |
| Shredding Speed | 5.5 m/min |
| Run Time | Continuous operation |
| Shred Type | Cross Cut |
To Next Page
