Kodak 220 - User Manual

IMPORTANT
SAFETY
INSTRUCTIONS
When using your photographic equip¬
ment, basic safety precautions should
always be followed, including the follow¬
ing:
1. Read and understand all instructions be¬
fore using.
2. Close supervision is necessary when any
appliance is used by or near children. Do
not leave appliance unattended while in
use.
3. Care must be taken as burns can occur
from touching hot parts.
4. Do not operate appliance with a dam¬
aged cord or if the appliance has been
dropped or damaged—-until it has been
examined by a qualified serviceman.
5. Position the cord so that it wiil not be
tripped over, pulled, or contact hot sur¬
faces.
6. If an extension cord is necessary, a cord
with a current rating at least equal to that
of the appliance should be used. Cords
rated for less amperage than the appli¬
ance may overheat.
7. Always unplug appliance from electrical
outlet before cleaning and servicing and
when not in use. Never yank cord to puii
plug from outlet. Grasp plug and pull to
disconnect.
8. Let appliance cool completely before put¬
ting away. Loop cord loosely around
appliance when storing.
9. To reduce the risk of electric shock, do
not immerse this appliance in water or
other liquids.
10. To reduce the risk of electric shock, do
not disassemble this appliance, but take
it to a qualified serviceman when service
or repair work is required. Incorrect reas¬
sembly can cause electric shock when
the appliance is used subsequently.
11. The use of an accessory attachment not
recommended by the manufacturer may
cause a risk of fire, electric shock, or
injury to persons.
12. Connect this appliance to a grounded out¬
let.
13. Disconnect this unit from its source of
supply before replacing the projection
lamp.
SAVE THESE
INSTRUCTIONS
INTRODUCTION
Congratulations on the purchase of your new KODAK
EKTAGRAPHIC AudioViewer/Projector.
Please study this instruction manual. Knowing how your Audio¬
Viewer/Projector works will help you to communicate your message
to your audience more effectively.
The current family of KODAK EKTAGRAPHIC AudioViewerI
Projectors has four models: the Models 220, 270, 470, and 570AF.
The Model 220 is a minimum-investment machine for playback of
synchronized soimd-slide programs for almost any application in
which automatic slide projection with sound for an individual or a
small group is required.
The Model 570AF provides additional features for maximum equip¬
ment versatility, such as autofocus capability and a variable
electronic timer for silent automatic slide advance.
The Models 270 and 470 offer a range of features in between these
two models to satisfy your particular needs.
IMPORTANT: This instruction manual explains all of the
operational features of our top-of-the-line AudioViewer/
Piojector—the Model 570Ar. It therefore describes in detail
features that your AudioViewer/Projector may not have.
To become familiar with the features provided by your Audio-
Viewer/ Projector, and to make this instruction manual as useful to
you as possible, scan the list of features under “Standard Features of
the Current Line of KODAK EKTAGRAPHIC AudioViewer/
Projectors;” then study the “Feature Comparison Chart— K ODAK
EKTAGRAPHIC AudioViewer/Projectors” so that you will be able to
identify the instructions that apply to your machine. (For your
convenience, specific AudioViewer/Projector models are identified in
the instructions, where appropriate.)
For Help
If you ever need technical assistance with your AudioViewer/
Projector, please contact your local dealer in Kodak audiovisual
products or call Kodak at 1-800-242-2424 from 9 a,m, to 8 p.m.,
(eastern time zone) Monday through Friday.
©Eastman Kodak Company, 1985

Kodak 220 Specifications

General

Type	Slide Projector
Film Format	35mm
Lens Aperture	f/3.5
Focusing	Manual
Light Source	Tungsten Halogen
Compatible Slide Format	2x2" (5x5 cm)
Lens	Ektanar
Slide Tray Capacity	80 slides
Power Supply	120V AC

Summary

IMPORTANT SAFETY INSTRUCTIONS

INTRODUCTION AND SETUP

Introduction to KODAK EKTAGRAPHIC AudioViewer;Projector

Welcome and overview of the product.

Operating Instructions Overview

General guide to operating the projector and its features.

Preparing for Program Playback

Steps to set up the projector for program playback.

Using the Built-In Viewing Screen and Focusing

How to use the screen, focus, and magnify images.

External Projection and Setup

Projecting onto external screens and leveling the unit.

Using the Built-In Cassette Machine

Instructions for operating the internal tape deck.

OPERATING CONTROLS AND FEATURES

Slide and Image Controls

Adjusting slides, focus, and magnification lever.

External Connections and Controls

Details on slide control outlets, jacks, and interconnects.

Cassette Tape Controls and Indicators

Explanation of tape controls and indicator lights.

Other Display Methods and Shutdown

Alternative slide display methods and shutdown procedures.

PROGRAM CREATION AND RECORDING

Preparing New Sound-Slide Programs

Guide to preparing program content, script, and visuals.

Editing and Loading Slides

Organizing, reviewing, and loading slides into the tray.

Avoiding Image Cropping

Guidance on slide formats and preventing image cropping.

Practicing and Recording Programs

Steps for practicing, recording audio, and signals.

Evaluating and Correcting Recordings

Assessing soundtrack quality and fixing errors.

Simultaneous Recording

Recording narration and background music together.

MAINTENANCE AND TROUBLESHOOTING

Preventing Tape Erasures

How to protect recorded tapes from accidental erasure.

Troubleshooting Common Issues

Solutions for jammed trays and burnt-out lamps.

Owners Maintenance Procedures

Cleaning the tape deck, screen, and aligning images.

SPECIFICATIONS AND SUPPORT

Alignment and Tape Specifications

Adjusting lifter height, magnifier alignment, and tape specs.

Using External Controls

How to use external remote controls with the projector.

Technical Specifications Overview

Summary of projector specifications including physical, optical, and electronic features.

Dimensional Drawings

Technical drawings of the projector for accessory building.

Warranty and Service Information

Details on product warranty and service center locations.