6 KODAK CAROUSEL® Slide Projector
Operation
Adding Your Slides Remove the lock ring by turning it counterclockwise and lifting it off.
Check each slide’s orientation (horizontal orvertical), and arrange them in the
order you wish to show them. Then turn the slides upside down.
Number each mount in the upper right-hand corner of the film’s shiny side.
Insert your first slide into the first slot in the tray so that the number is visible
on the outer circumference of the tray. Insert your second slide in the second
slot with the emulsion (dull side) facing your first slide, and so on.
To Next Page
Loading...
Need help?
General