Kodak 5600 - BC5601 Carousel Projector User Manual

4 KODAK CAROUSEL® Slide Projector
Operation
Operation
Startup
Open the storage compartment and remove the remote control.
Plug the 5-pin cable remote connector into the remote-control receptacle,
aligning the raised dot with the metallic rivet head.
Plug the power cord into a grounded outlet with 110- to 125-volt 60 Hz
current only.

Kodak 5600 - BC5601 Carousel Projector Specifications

General

Brand	Kodak
Model	5600 - BC5601 Carousel Projector
Category	Projector
Language	English