Do you have a question about the Kodak 550 and is the answer not in the manual?
Ensures uninterrupted slide projection even with bent or broken slides, allowing easy removal.
Holds 80 slides and supports various mount types and sizes for convenient storage.
Allows for timed slide changes at 5, 10, or 20-second intervals for automated shows.
Enables powered advancement or reversal of slides using dedicated buttons.
Facilitates slide changing and focusing via a wired remote control.
Allows on-demand selection and display of any individual slide in the tray.
Features user-friendly finger-tip knobs for precise image elevation and focus adjustment.
Highlights the 5-inch f/3.5 Ektanar lens for sharp, brilliant image projection.
Notes the projector's dimensions and weight for ease of handling and storage.
Initial placement and connection of the projector for basic operation.
Inserting slides into the projector's slide tray for projection.
Choosing between HIGH (500W) or LOW (300W) illumination levels.
Adjusting the projector's height to center the image on the screen.
Using the focus knob to achieve a sharp and clear projected image.
Configuring the timer for automatic slide sequencing at set intervals.
Connecting the power cord and utilizing the cord storage compartment.
Specifies voltage, cycle, and outlet needs for safe and proper operation.
Recommendations for screen size, positioning, and optimal audience seating.
Instructions for focusing and adjusting the Kodak Projection Zoom Lens for screen coverage.
Detailed steps for correctly inserting slides into the tray, noting orientation.
Guide on aligning and seating the loaded slide tray onto the projector's center post.
Turning the projection lamp on using HIGH or LOW buttons for illumination.
Using ELEVATE and FOCUS knobs for precise image positioning and sharpness.
Explains MANUAL, 5, 10, and 20-second timer functions for slide sequencing.
Manual control for advancing or reversing slides using dedicated buttons.
Using the remote for slide changes and focus adjustment at a distance.
Procedure to remove the slide tray using the SELECT button.
Selecting and projecting individual slides out of sequence.
Method for projecting single slides without using the slide tray.
Sequence of actions to perform after completing slide projection.
Detailed instructions for safely removing and installing a new projection lamp.
Procedure for cleaning the front and back surfaces of the projection lens.
Guide to cleaning condenser lenses and heat-absorbing glass elements.
How to use the emergency lever to remove the slide tray if the mechanism fails.
List of five additional lenses available for the Kodak Carousel Projector.
Information on 25-foot extension cords for the remote-control cord.
Details on connecting the programmer to a tape recorder for synchronized audio.
Details of the one-year warranty for defects in materials or workmanship.
Instructions for sending the projector for repair or service.