Kodak 550 - Control Buttons and Remote; Forward and Reverse Buttons; Remote Control Functionality

FORWARD (FWD) AND REVERSE (REV) BUTTONS
Set the automatic timer on MANUAL and then momen-
tarily depress the forward button , to advance the slide
tray , or the reverse button , to reverse the slide tray . Hold-
ing either button depressed will advance or reverse the
slide tray for scanning .
REMOTE CONTROL
A remote control having both a rocki ng-type lever for
advancing or reversing the slide tray and a rocking-type
wheel for power - focusing the lens, is furnished with the
projector . Plug the remote c ontro l int o the remote -con-
trol socket at the back of the pro jec tor . The small dot
on the plug should be upward when the plug is engaged
in the socket . Depress the LOW or HIGH button to turn on
the projection lamp . Set the automat ic timer to MANUAL.
Momentarily depress the front or back of the rocking-
type lever to change the sl ides (in a forward or reverse
direction , respectively) at any desired time-int erval.
NOTE: The
fully automatic operation can be interrupted
at any time by use of the forward or reverse button , or
the remote control. Momentarily rotatin g the rocking-type
wheel forward or backward causes the projection lens to
focus forward or backward respectively .
11