Additional Information
A-3
Packing and Transporting the Printer
The printer weighs approximately 60 lbs (27.2 kg) and is
heavier at the front than at the back. Always use two people
when lifting or moving the printer.
Shipping the printer with paper and ribbon installed can
cause damage to the printer.
1. Remove the paper and ribbon from the printer.
2. Reinstall the packing materials (see page 1-2).
3. Repack the printer in the original packing box. See the
packing/unpacking instructions included with the box.
Getting Help
Help with your printer is available from the following sources:
• “Chapter 4 Troubleshooting” in this user’s guide.
• KODAK Service and Support.
To Next Page
Loading...
