9
CONTROL-BUTTON ACTIVATOR
You can use the knob on the clasp of
the camera strap to activate the small
control buttons on the camera.
LOADING THE BATTERY
This camera uses one 3-volt lithium
KODAK KCR2 (or equivalent) Battery
that supplies power for all camera
operations.
1. Slide the battery-
door latch to
open the battery
door (21).
2. Insert the battery
into the battery
chamber.
3. Snap the battery
door closed.
• After you load
a new battery
into the
camera, reset
the date and
time.
MODES
To Next Page
Loading...
