Kodak Advantix T700

26
PRINT-QUANTITY SELECTION
Before you take a picture, you can
choose the number of prints from 0 to 9
you will receive from the photofinishing
lab. This service is dependent
on the photofinisher’s capability.
1. Repeatedly press the menu
button (24) until “PRINT QTY” and
“P 1 ” appears on the LCD panel (13).
4. Press the enter/self-timer
button (22) to store the information.
• After you take the picture, the print
quantity defaults to 1.
Remember you must select a print
quantity before you take a picture.
ISO FILM-SPEED DISPLAY
You can view on the LCD panel (14) the
ISO film speed of the film that is loaded in
the camera when you first turn on the
camera or when you press the menu
button (24) three times. The LCD panel
displays the ISO speed for approxi-
mately 3 seconds and then returns to the
date display.
ISO
MODES
AUTO
EXP. LEFT
MENU
SELECT
ENTER
2. Press the select button (23).
• “ PRINT QTY” and P “1 ” blinks on
the LCD panel.
3. Press the right or left side of the zoom
button (14) or the select button (23) to
select the number of prints
you want.
EXP. LEFT
MENU
SELECT
ENTER
AUTO
MODES
QTY
PRINT