Kodak C520 - USING THE BABY MONITOR; Setting Up the Monitor; Powering the Camera On;Off

Page | 62 Parent Unit Options
1. Press “ ” for the menu bar.
2. Press the “ ” or “ ” until ZOOM is
highlighted. Press “ ” to conirm.
3. Move to “ ” (ZOOM IN) or “ ” (ZOOM OUT) to
select the 1X or 2X Zoom (The default setting is 1X)
4. Press the “ ” button to save and exit.
4.9 Zoom
4.10 Picture Mode (WB)
1. Press “ ” on the Parent Unit for the menu bar.
2. Press “ ” or “ ” button to select ,
then press “ ” to proceed to the next step.
3. Press “ ” button or “ ” to select “ “
(INDOOR) or ” ” (OUTDOOR), then press
“ ” to apply.
4. If the camera is placed indoor but with outdoor
mode setting on, the picture may become darker.
If the camera is placed outdoor but with indoor
mode setting, the picture may be over exposed.
1. Press the “
+” button or “-” button on the side of the
Parent Unit to select the desired volume level
(levels 05).
4.12 Volume
4.11 Voice Activation
1. Normal audio will resume once the audio level is
higher than the VOX audio threshold set. You can
set 4 dierent VOX audio threshold levels
2. Press “ ” on the Parent Unit for the menu bar.
3. Press “ ” or “ ” button to select “ “ (VOX)
, then press “ ” to proceed to the next step.
4. Press “ ” button or “ ” to select the VOX
audio threshold level “ “ , “ “ , “ “,
“ “. “ “ means the lowest threshold level.
Select “ ” to disable VOX, then press “ ”
to apply.