Page | 84 Kodak Smart Home
In the middle of the setup process, you will be
required to get your KODAK CHERISH C520/C525/
C525P Wi-Fi Baby Monitor into the setup mode. To do
this:
• Press and hold the Pair button for 3 seconds until
you hear a beep sound
• You will then hear Start Pairing Mode indicating
that the Camera has entered the setup mode.
You may now release the Pair button and tap
Continue on your mobile device
Step 4: Get Your Camera into the Setup
Mode
For IOS devices, you will have to connect to the
camera’s Wi-Fi through your Wi-Fi settings of your
phone.
To do this:
• Tap the Go To Settings button to access to the
Wi-Fi settings on your phone
• In the Wi-Fi settings of your phone, connect to
KODAKCam-CXXXXXXXXX and return to the
app.
Step 4.1: Connect to the Camera’s Wi-Fi
from Your Phone(For IOS Only)
To Next Page
Loading...
