Troubleshooting
41
Shutter button
does not work.
Camera is not turned
on.
Turn on the camera
(page 4).
The camera is
processing a picture;
the ready light (near
the viewfinder) is
blinking red.
Wait until the ready light stops blinking red
before attempting to take another picture.
You can take a picture even if the ready light
is blinking green.
The card or internal
memory is full.
Transfer pictures to the computer (page 38),
delete pictures from the camera (page 25),
switch storage locations (page 20), or insert
a card with available memory (page 7).
The Shutter button
was not pressed.
For best pictures, see page 8.
In Review mode,
you do not see a
picture (or the
expected
picture) on the
camera screen.
The camera may not
be accessing the
correct storage
location.
Check the picture storage location setting
(
page 20).
In Review mode,
a black screen is
displayed
instead of a
picture.
The file format is
unrecognized.
Transfer the picture to the computer
(
page 38).
Slide show does
not run on
external video
device.
Video Out setting is
incorrect.
Adjust the camera Video Out setting (NTSC
or PAL,
page 22).
External device is set
incorrectly.
See the external device’s user’s guide.
Problem Cause Solution
To Next Page
Loading...
Need help?
General
