Troubleshooting
www.kodak.com/go/support
47
Picture is too dark ■ Reposition camera for more available light.
■ Use Fill flash (page 20) or change your position so light is not behind
the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (page 52).
■ To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light turns green, press the Shutter button
completely down to take the picture.
■ Adjust exposure compensation (page 23).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn off the flash (page 20).
■ Move so that the distance between you and the subject is within the
effective flash range (page 52).
■ To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light turns green, press the Shutter button
completely down to take the picture.
■ Adjust exposure compensation (page 23).
Status Solution
To Next Page
Loading...
Need help?
General
