22 www.kodak.com/go/support
4 Doing more with your camera
Changing picture-taking settings
You can change settings to get the best results from your camera.
1 Press the Menu button.
2 Press to highlight a setting, then press OK.
3 Choose an option, then press OK.
■ Press the Menu button to exit the menu.
NOTE: To better understand each menu option, use camera Help. Highlight a menu choice, then press the
button.
Some settings remain until you change them; others, until you change modes or turn off the camera.
Some modes offer limited settings.
Press Menu, , and
OK to access settings
Options
Self-timer 10 seconds (default)—so you have time to get into the
scene.
2 seconds—for a steady, auto-shutter release on a tripod.
2-shot—one picture is taken after a 10-second delay. A
second picture is taken 8 seconds later.
Exposure Compensation
Increase or decrease
brightness before taking a
picture. (Also see page 28.)
0.0, -0.5, -1.0, -1.5, -2.0, +0.5, +1.0, +1.5, +2.0
To Next Page
Loading...
