Kodak EasyShare G610 - Reduce Red Eye in Your Prints; To Set;Change the Red-Eye Reduction Default

12 www.kodak.com/go/easysharecenter
ENGLISH
Reduce red eye in your prints
Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.
• Your printer dock may apply red-eye reduction to an area such as red-painted fingernails,
which darkens the area in your print. In this case, turn off red-eye reduction.
• Red-eye reduction is applied to images that were captured using the flash on your digital camera.
• You can set red-eye reduction default to always being on or off.
To set/change the red-eye reduction default:
3
4
Follow instructions on the camera or computer screen.
Press OK/Print to accept the red-eye default setting.
Connect the printer dock power (page 3), then dock your camera (page 4).
• Printing time may slightly increase when using red-eye reduction.
On the printer dock, press and hold
(Down button) and (Transfer button) at the same
time for 5 seconds. (The Red Eye screen appears.)
1
2