Doing more with your camera
14 www.kodak.com/go/easysharecenter
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any picture-taking mode, press until the
desired self-timer icon appears for:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, shutter release on a tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
2 Compose the scene. Press the Shutter button
halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use burst to take up to 3 pictures in quick succession.
1 In any picture-taking mode, repeatedly press until the Burst icon appears at the
top of the LCD.
2 Press the Shutter button halfway to focus and set exposure. Press the Shutter
button completely down and hold it to take pictures.
urg_00916.book Page 14 Wednesday, June 18, 2008 9:29 AM
To Next Page
Loading...
