16 www.kodak.com/go/support
Taking pictures/videos
Using Program mode
Program mode gives access to manual settings like ISO, White Balance, Focus Zone,
and Exposure Compensation.
1 Press the Mode button , choose Scene mode (see page 14), and press OK.
Choose Program, then press OK.
2 Press to choose a setting, then press OK.
Press to change a setting, then press OK to save it.
Self-timer/Burst Include yourself in a picture (page 17). Burst takes a series of pictures in
rapid succession.
Exposure
Compensation
Adjust the exposure. If a scene is too light, decrease the setting; if it’s
dark, increase the setting.
ISO Adjust the camera’s sensitivity to light. Higher ISO indicates greater
sensitivity.
NOTE: A higher ISO may produce unwanted “noise” in a picture.
White Balance To make picture color more accurate, choose the setting that matches the
current lighting.
Focus Zone Choose Multi-Zone, Center-Zone, Face Priority.
Focus Mode Choose Auto or Infinity.
White
Balance
Exposure
compensation
ISO
Focus
Zone
More
tools
Self-
timer
To Next Page
Loading...
