Kodak EASYSHARE M583 User Manual

42 www.kodak.com/go/support
6 Install software
Install software, transfer pictures, and share
IMPORTANT: To use the sharing and social networking features, you must install the
KODAK Share Button App.
Make sure the computer is connected to the Internet. When you connect the camera
to the computer, the KODAK Camera Setup App automatically runs. Follow the
prompts to install the KODAK Share Button App.
1 Turn off the camera.
2 Use the KODAK Camera USB Cable, Micro B / 5-Pin
to connect the camera to the computer. Use only
the cable included with this camera.
3 Turn on the camera.
IMPORTANT:
If the app does not run, download and
install the right version for your operating system:
www.kodak.com/go/camerasw
4 After the software is installed, follow the prompts
to transfer pictures and videos to your computer.
NOTE: You can also use a card reader to transfer pictures/videos.
Download KODAK Share Button App www.kodak.com/go/camerasw
Get Software help www.kodak.com/go/support
See How-To videos www.kodak.com/go/m583demos

Kodak EASYSHARE M583 Specifications

General

Megapixel	14 MP
Camera type	Compact camera
Image stabilizer	No
Image sensor size	- \
Maximum image resolution	4320 x 3240 pixels
Still image resolution(s)	-
Digital zoom	5 x
Optical zoom	8 x
Focal length range	- mm
Interface	USB
Minimum RAM	1024 MB
Video capability	Yes
Minimum processor	Pentium 4, 2.8 GHz
Camera shutter speed	- s
Minimum storage drive space	300 MB
Minimum system requirements	IE 6.0; SAFARI 1.1; CD-ROM; 1024 × 768
Compatible operating systems	Windows XP SP2, Vista, Windows 7; Macintosh 10.4, 10.5, 10.6 +
Focal length (35mm film equivalent)	28 - 224 mm
Flash modes	Auto
Internal memory	- MB
Compatible memory cards	microSDHC
Maximum memory card size	4 GB
Motion JPEG frame rate	30 fps
Maximum video resolution	1280 x 720 pixels
Display diagonal	3 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Red
Battery type	KLIC-7006