Troubleshooting
www.kodak.com/go/support
47
Getting help on the Web
Camera
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (see page 12).
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, page 48.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, decrease the Exposure Compensation (see
page 35).
Get support for your product (FAQs, troubleshooting
information, arrange for repairs, etc.)
www.kodak.com/go/M200support
Purchase camera accessories www.kodak.com/go/accessories
Download the latest camera firmware and software www.kodak.com/go/M200downloads
Register your camera www.kodak.com/go/register
Chat, email, write, or phone Kodak
(Chat not available in all languages)
www.kodak.com/go/contact
Get information on KODAK All-in-One Printers www.kodak.com/go/inkjet
Status Solution
To Next Page
Loading...
