Getting started
2 www.kodak.com/go/easysharecenter
Storing the remote control
1 Install the remote control holder on the back of the
frame (page i).
2 Slide the remote into the holder for convenient,
out-of-the-way storage.
Replacing the remote control battery
Setting up your picture frame
Buttons and controls
All buttons and controls described in this guide (for example: press ) are on the
remote control unless otherwise noted.
12
* release tab
Push and hold the release
tab* while pulling the battery
holder out of the remote.
Follow the graphic on the
back of the remote control.
Replace with a CR2025, 3V lithium cell battery.
To Next Page
Loading...
