22 www.kodak.com/go/digitalframesupport
4 Troubleshooting and support
For step-by-step product support, visit www.kodak.com/go/digitalframesupport and
select Step-by-Step Solutions & Repair.
Picture frame problems
If... Try one or more of the following
Frame does not
turn on.
■ Make sure the power cable that was included with your frame is
connected securely (see page 3).
■ Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
Nothing happens when
a memory card or USB
device is connected.
■ Insert a certified SD/SDHC/MMC/XD/MS/MS Pro Duo Card, with
images, into the card slot, then push to seat it (see page 7).
■ Make sure the USB device is connected securely (see page 7).
■ Make sure the file format of your pictures and videos are
supported. (See the Extended user guide).
NOTE: Pictures may take a longer time to display when the picture/video files are large
or when using a large capacity memory card or other connected device.
Touch border doesn’t
work.
■ Use your finger to make your selections on the Quick Touch
Borders (see page 4). Lights on the border show you where to
touch.
IMPORTANT:
Do not slide on the right border (tap only).
■ Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then
release.
To Next Page
Loading...
