www.kodak.com/go/digitalframesupport 3
1 Getting started
Setting up the stand
Attaching the power cable
Do not use this power cable with other devices, including digital
cameras.
Pull to adjust the frame angle for
best viewing.
Your frame displays pictures in landscape
orientation .
To change to portrait orientation , turn the
frame on its side.
Charge the battery (installed at the factory)
by leaving the power connected for at
least 3 hours. The frame does not need to
be turned on.
Your power cable may look different
from the one pictured. Use the plug
that accommodates your type of
power outlet.
To Next Page
Loading...
