6 www.kodak.com/go/digitalframesupport
Getting started
Setting your language
The language screen appears the first time you turn on your frame.
■ Tap the light next to an up/down arrow to
highlight your language, then tap OK.
To change the language later:
■ Tap (Menu) (Settings) Language
OK. Tap an up/down arrow to highlight your
language, then tap OK.
Your settings are saved and the Clock and Date screen
appears.
Setting the clock and date
1 Set the clock. Tap the down arrow to
highlight Clock, then slide or tap between the
left/right arrow lights to select the current time
(based on a 24-hour clock).
2 Set the date. Tap the down arrow to
highlight Year/Month/Day, then slide or tap
between the left/right arrow lights to select the
current date (three separate settings).
3 Tap OK to save your settings and close the Menu
screen.
To close the screen without saving, highlight Exit,
then tap OK.
To change or set the clock, date, energy saver, and automatic timer later:
■ Tap (Menu) (Settings) OK Time/On Off OK.
Press and hold to move quickly
through the time and date
settings.
To Next Page
Loading...
