www.kodak.com/go/M5370support 23
4 Solving camera problems
Go to www.kodak.com/go/M5370support for the Extended user guide,
firmware updates, and answers to your questions.
Status Solution
Camera does not
turn on/off or function
■ Make sure the battery is charged and
installed correctly (see page 2).
LCD is too dark.
■ Adjust the LCD Brightness setting in the
Settings menu (see page 11).
Short battery life
■ Make sure the battery is charged (see
page 2).
■ Limit the time you review pictures/videos
on the camera LCD.
■ Purchase a spare battery at
www.kodak.com/go/accessories.
Flash does not fire
■ The flash does not fire in all modes.
Change modes as needed (see page 19).
Computer does not
communicate with
the camera
■ Turn the camera off, then back on.
■ Make sure the battery is charged and
installed correctly (see page 2).
■ Make sure a KODAK Camera USB Cable,
Micro B / 5-Pin is connected to the
camera and the computer (see page 15).
Then turn on the camera.
■ See KODAK Software Downloads at
www.kodak.com/go/camerasw.
urg_01281.book Page 23 Thursday, May 12, 2011 9:56 AM
To Next Page
Loading...
