8 www.kodak.com/go/support
Taking pictures/videos
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place camera on a tripod or flat surface
1 In any Still mode (except SCN-Panorama), press the
Menu button.
2 Press to highlight Self-Timer, then press OK.
3 Press to choose:
10 seconds—A picture is taken after a 10-second delay
(so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second delay (for
a steady, auto-shutter release on a tripod).
2 shot—The first picture is taken after a 10-second delay.
A second picture is taken 8 seconds later.
Press OK, then the Menu button.
4 Compose the scene.
5 Press the Shutter button halfway, then
completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a video, but:
■ Press the Video mode button .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
Menu
To Next Page
Loading...
Need help?
General
