Changing settings and more
www.kodak.com/go/support
64
Adding a matte and faceplate
Customize your frame with a decorative matte and/or faceplate (packaged with some
frames). Additional mattes and faceplates are available for purchase (see page 66).
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your
wall.
Matte
Faceplate
Frame
When you are not using the
matte, reapply it to the liner
and store in a plastic bag to
keep the adhesive backing
clean.
Clip (use to reroute, secure, and
center the power cable)
Power cable
Wall mounting
holes
To change to portrait orientation, turn your frame
90° and use the wall mounting holes at the top.
To Next Page
Loading...
