Setting up for wireless operation
www.kodak.com/go/support
10
Verifying computer/device connections
Scanning to verify your wireless network connection gives your frame access to
content on your devices wirelessly.
After installing the software (see page 9), return to your frame then:
1 Tap OK.
The network connection setup screen appears.
If you forgot to install the software, tap Back then install the software (see
page 9). When you are done installing the software on your computer, tap OK on
your frame, then continue with step 2.
2 Tap Scan now to verify your computer connection.
The Scanning screen appears as the frame scans your network and then lists available
computers and other picture sources that your frame can access wirelessly.
You can select Scan later if you want to verify your connections later.
To verify your connections later, tap Home
→ Settings → Network
→ Verify computer connection.
Scan now
Scan later
To Next Page
Loading...
