Setting up for wireless operation
www.kodak.com/go/digitalframesupport 13
Verifying computer/device connections
After installing the software (page 10) and setting up access to Web content (page 12),
return to the Network Connection screen on your frame (see page 8).
1 Tap Scan now.
The Scanning screen appears as the frame scans your network and then lists available
computers and other picture sources that your frame can access wirelessly.
If your computer is listed, your wireless setup is successful. Tap Done.
If your computer is not listed, tap Scan again or tap Help for options.
2 Tap Done to close the window and return to the Home screen.
Your frame can now access the content on your host computer, wirelessly. Your computer
appears as a picture source icon on your frame (see page 16).
NOTE:
Select Scan later to verify later that
your frame can access available
devices wirelessly.
To verify later, tap
→ Settings → Network → Verify
computer connection.
(Home)
To Next Page
Loading...
