www.kodak.com/go/z1012support 19
3 Using the advanced features
Using the Menu button to change settings
NOTE: Some settings remain until you change them; others remain until you turn off the camera.
1 Press the Menu button.
2 Press to highlight a menu tab:
■ Capture for the most common picture-taking settings.
■ Capture + for other picture-taking settings. Available only in PASM and
Panorama modes.
■ Setup for other camera settings.
3 Press to highlight a setting, then press the OK button.
4 Choose an option, then press the OK button.
NOTE: Press the Info button for information about camera settings and options. Some capture modes
offer limited settings.
urg_00850.book Page 19 Wednesday, March 26, 2008 6:22 AM
To Next Page
Loading...
Need help?
General
