Doing more with your camera
www.kodak.com/go/support
35
Customizing your camera
Use Setup to customize your camera settings.
1 In any mode, press the Menu button.
2 Press to highlight Setup, then press the OK button.
3 Press to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button.
5 Press the Menu button to exit.
Setting Options
Return to previous menu.
Capture Frame Grid
Turn framing grid on or off.
On
Off (default)
Quickview
Change Quickview default.
On
Off (default)
Advanced Digital Zoom
Choose how digital zoom is employed.
Continuous—no pause between optical and
digital zoom.
Pause (default)—after reaching 10X optical
zoom, the zoom button must be released, then
activated again to begin digital zoom.
None—digital zoom is disabled.
Print Warning Pause (default)—when the slider on the zoom
indicator pauses during digital zoom, the zoom
must be released and reactivated. The slider turns
red when the picture may not render an acceptable
4 x 6 in. (10 x 15 cm) print.
None—no pause.
To Next Page
Loading...
