Kodak EASYSHARE Z812 IS

50 www.kodak.com/go/support
Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or
without a computer. Purchase this and other accessories at a dealer of Kodak
products or www.kodak.com/go/z812accessories.
Direct printing with a PictBridge enabled printer
Your camera features PictBridge technology, so you can print directly to PictBridge
enabled printers. You need:
■ Camera with fully charged batteries, or with optional Kodak 3-volt AC adapter
■ PictBridge enabled printer
■ USB cable included with your camera
Connecting the camera to a PictBridge enabled printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into
the camera and into an electrical outlet.
IMPORTANT:
Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.
3 Connect the USB cable from the camera to the printer. (See your printer user guide
for details. See www.kodak.com/go/z812accessories to order cables.)