Doing more with your camera
www.kodak.com/go/z8612support 13
Taking self-timer pictures
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
1 Place the camera on a tripod or flat surface. In most
Still modes, press the Self-timer/Burst button :
■ Once for a 10-second delay (so you have time to
get into the scene)
■ Again for a 2-second delay (for a steady,
auto-shutter release on a tripod)
■ Again for 2-shot (one picture taken after 10
seconds and another picture taken 8 seconds
later)
2 Compose the scene. Press the Shutter button
halfway, then completely down.
To cancel the Self-timer before the picture is taken, press
the Self-timer/Burst button, or press the Shutter button
completely down.
Use the same procedure to use the self-timer in Video mode, but:
■ Turn the Mode dial to Video .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
To Next Page
Loading...
Need help?
General
