Why sound tags are not transferred to the computer with pictures from my Kodak Digital Camera?
Assign a Sound tag to pictures taken in any mode except Smart Capture on your Kodak Digital Camera.
Why my Kodak EasyShare Z915 does not communicate with the computer?
If your Kodak Digital Camera's computer does not communicate, try the following: turn on the camera, install new batteries or charge rechargeable batteries, connect the cable to the camera and computer port, install the software, disconnect the USB cable (close all open applications and reinstall the software), disconnect the camera from the computer (close all software applications, then reconnect the camera).
What to do if my Kodak EasyShare Z915 Digital Camera says internal memory requires formatting?
If your Kodak Digital Camera displays the message 'Internal memory requires formatting', you should format the internal memory. Keep in mind that formatting will erase all pictures and videos, including protected files.
What to do if the Reset Camera feature did not take effect on my Kodak EasyShare Z915 Digital Camera?
If the Reset Camera feature on your Kodak Digital Camera did not take effect, turn the camera off and then on again after using the Reset Camera feature.
Why are my Kodak EasyShare Z915 pictures too dark?
If pictures taken with your Kodak Digital Camera appear too dark, try the following: turn on the flash, move closer to the subject (within 11.8 ft (3.6 m) in wide angle or 6.9 ft (2.1 m) in telephoto), use Fill flash or adjust your position to avoid having light behind the subject, or increase Exposure Compensation.
Why can't I transfer pictures from my Kodak EasyShare Z915? (The Add New Hardware Wizard cannot locate drivers.)
If you cannot transfer pictures from your Kodak Digital Camera and the Add New Hardware Wizard cannot locate drivers, disconnect the USB cable, close all open applications, and reinstall the software.
Why doesn't the slide show run on external video device with my Kodak EasyShare Z915?
If your Kodak Digital Camera slide show does not run on an external video device, adjust the camera Video Out setting (NTSC or PAL).
What to do if my Kodak EasyShare Z915 says no images to display?
If your Kodak Digital Camera displays the message 'No images to display', change the image storage location setting.
Why is the shutter button not working on my Kodak EasyShare Z915 Digital Camera?
If your Kodak Digital Camera's shutter button isn't working, first, ensure the camera is turned on. If that doesn't work, transfer pictures to the computer, delete pictures from the camera, switch image storage locations, or insert a card with available memory.
Why is my Kodak Digital Camera showing a blue or black screen in Review mode?
If your Kodak Digital Camera shows a blue or black screen instead of a picture in Review mode, transfer the picture to the computer, then format the card or internal memory. Be aware that formatting will delete all pictures and videos, including protected files.
General| Megapixel | 10 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.3 \ |
| Supported aspect ratios | 16:9 |
| Maximum image resolution | 3648 x 2736 pixels |
| Optical zoom | 10 x |
| Combined zoom | 50 x |
| Focal length range | - mm |
| Interface | USB 2.0 |
| Digital SLR | No |
| Minimum RAM | 128 MB |
| Aperture range (F-F) | 3.5 - 4.8 |
| Camera shutter speed | 1/8 - 1/1250 s |
| Minimum storage drive space | 200 MB |
| Compatible operating systems | Windows XP + Mac OS X 10.3 + |
| Focal length (35mm film equivalent) | 35 - 350 mm |
| Focus adjustment | Auto |
| Normal focusing range | 0.5 -?/1.2 -? m |
| Auto focusing (AF) modes | Continuous Auto Focus, Single Auto Focus |
| Macro focusing range (tele) | 0.6 - 1.3 m |
| Macro focusing range (wide) | 0.12 - 0.6 m |
| Normal focusing range (tele) | 1.2 - ∞ m |
| Normal focusing range (wide) | 0.5 - ∞ m |
| Light metering | Centre-weighted, Spot |
| ISO sensitivity | 100, 200, 400, 800, 1600, Auto |
| Light exposure modes | aperture priority AE, shutter priority AE |
| Flash modes | Auto, Fill-in, Flash off, Red-eye reduction |
| Flash range (tele) | 0 - 3.9 m |
| Flash range (wide) | 5.4 m |
| Internal memory | 32 MB |
| Compatible memory cards | SD, SDHC |
| Motion JPEG frame rate | 30 fps |
| Maximum video resolution | 640 x 480 pixels |
| Display diagonal | 2.5 \ |
| Display resolution (numeric) | 230000 pixels |
| USB version | 2.0 |
| Scene modes | Backlight, Beach, Candlelight, Children, Documents, Fireworks, Museum, Night landscape, Night portrait, Panorama, Portrait, Self-portrait, Snow, Sunset, Landscape (scenery) |
| Image editing | crop, trimming |
| Photo effects | Black&White, Neutral, Sepia |
| White balance | Auto, Daylight, Fluorescent, Shade, Tungsten |
| Camera playback | movie, single image, slide show |
| Self-timer delay | 10 s |
| Product color | Red |
| Battery type | AA |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 35.7 mm |
|---|---|
| Width | 107 mm |
| Height | 72.4 mm |
| Weight | 220 g |
| Dimensions (W x D x H) (imperial) | 4.2 x 1.4 x 2.9 \ |
Install software before connecting cables and follow on-screen instructions.
Insert batteries into the compartment.
Turn off camera, insert/remove card, then turn on camera.
Power on the camera.
Set language, date, and time using navigation buttons and OK.
Turn Mode dial to Smart Capture setting.
Press shutter halfway to focus, then fully to take picture.
Press Review button to enter/exit review mode.
Navigate through media or play videos using buttons.
Turn off camera, connect USB, turn on camera, follow software prompts.
Overview of capture modes: Smart Capture, Sport, Panorama, Scene, PASM, Video.
General picture taking—excellent image quality and ease of use.
Program, Aperture, Shutter, Manual modes for more creative control.
Record video with sound.
Turn Mode dial to Video, press Shutter button to record/stop.
Turn Mode dial to Scene, navigate, and select mode.
Frame subject, use T/W to zoom, take picture.
Use framing marks and adjust distance for focus.
Auto mode uses flash when needed.
Fill mode fires flash for every picture, useful for shadows.
Red-eye Reduction uses preflash or digital correction.
Press Focus button to select desired icon (AF, Infinity, Macro).
Press shutter halfway to focus/expose, then fully to take picture.
Set self-timer for 10s, 2s, or 2-shot delay.
Press shutter fully and hold to take up to 3 pictures.
Turn Mode dial to Panorama, select direction, press OK.
Take first picture, compose second, press OK to stitch 2 or 3 pictures.
Program mode: auto shooting with full menu access.
Aperture Priority mode: controls depth of field.
Shutter Priority mode: prevents blur for moving subjects.
Manual mode: highest level of creative control.
Adjust ISO for camera sensitivity to light.
Adjust flash brightness.
Adjust exposure to make pictures darker or lighter.
Control how long the shutter stays open.
Control lens opening size for depth of field.
Adjust exposure compensation before taking pictures to control brightness.
Combine exposure compensation and bracketing for best exposure.
Press Review to view media, use buttons for navigation.
Magnify pictures during review using '+' and navigation buttons.
Press Review, navigate, and press OK to play video.
Review, find, and delete pictures/videos using the Delete button.
Recover accidentally deleted pictures/videos immediately after deletion.
Protect pictures/videos from deletion via Review, Menu, Protect.
Caution: Formatting deletes all pictures/videos, protected files, tags, and favorites.
Install software by closing apps, inserting CD, and following prompts.
Caution: Install software before connecting camera.
Turn off camera, connect USB, turn on camera, follow software prompts.
Troubleshoot camera not turning on: check batteries.
Troubleshoot camera not turning off: remove/reinsert battery.
Troubleshoot corrupted pictures: retake, keep batteries charged, format card.
Troubleshoot shutter button not working: check power, storage, software.
Troubleshoot card recognition: buy certified card, format, insert correctly.
Troubleshoot camera freezing with card: turn off before insert/remove.
Troubleshoot transfer failure: disconnect USB, reinstall software.
Troubleshoot no computer communication: check power, cable, software.
Do not disassemble. Refer servicing to qualified personnel. Avoid hazards.
To Next Page