Why can't I delete some pictures from my Kodak EasyShare Z915 Digital Camera?
If you are unable to delete some pictures from your Kodak Digital Camera, it might be because the picture is protected. A protected picture cannot be deleted unless the Protect tag is removed or the card/internal memory is formatted.
What to do if Kodak EasyShare Z915 Digital Camera says memory card is unusable?
If your Kodak Digital Camera displays 'Memory card is unusable (Insert new memory card)', you can insert a new card or format the card. Be aware that formatting a card deletes all pictures and videos, including protected files.
What to do if Kodak EasyShare Z915 says memory card is locked?
If your Kodak Digital Camera displays 'Memory card is locked (Insert new memory card)', you can insert a new card, move the switch on the card to unlock it, or change the image storage location to internal memory.
What to do if my Kodak Digital Camera says memory card requires formatting?
If your Kodak Digital Camera displays the message 'Memory card requires formatting', you can insert a new card or format the card. Be aware that formatting the card will erase all pictures and videos, including any protected files.
What to do if Kodak EasyShare Z915 Digital Camera does not recognize SD/SDHC Card?
To resolve the issue of your Kodak Digital Camera not recognizing the SD/SDHC Card, purchase a certified SD/SDHC Card, format the card (note that this deletes all pictures and videos, including protected files), or ensure the card is properly inserted into the slot.
Why is the shutter button not working on my Kodak EasyShare Z915 Digital Camera?
If your Kodak Digital Camera's shutter button isn't working, first, ensure the camera is turned on. If that doesn't work, transfer pictures to the computer, delete pictures from the camera, switch image storage locations, or insert a card with available memory.
What to do if Kodak EasyShare Z915 says memory card and internal memory full?
If your Kodak Digital Camera displays the message 'Memory card and internal memory full', transfer pictures to the computer, then format the card or internal memory. Keep in mind that formatting will erase all pictures and videos, including protected files.
Why is my Kodak Digital Camera showing a blue or black screen in Review mode?
If your Kodak Digital Camera shows a blue or black screen instead of a picture in Review mode, transfer the picture to the computer, then format the card or internal memory. Be aware that formatting will delete all pictures and videos, including protected files.
What to do if my Kodak EasyShare Z915 Digital Camera says memory card full?
If your Kodak Digital Camera displays the message 'Memory card full', you can insert a new card, transfer pictures to your computer, or delete pictures from the camera to free up space.
Why are pictures taken on a tripod blurry with my Kodak EasyShare Z915 Digital Camera?
If pictures taken on a tripod with your Kodak Digital Camera are blurry, the tripod may be interfering with the camera’s image stabilizer. In the Setup menu, set Image Stabilizer to Off.
General| Megapixel | 10 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.3 \ |
| Supported aspect ratios | 16:9 |
| Maximum image resolution | 3648 x 2736 pixels |
| Optical zoom | 10 x |
| Combined zoom | 50 x |
| Focal length range | - mm |
| Interface | USB 2.0 |
| Digital SLR | No |
| Minimum RAM | 128 MB |
| Aperture range (F-F) | 3.5 - 4.8 |
| Camera shutter speed | 1/8 - 1/1250 s |
| Minimum storage drive space | 200 MB |
| Compatible operating systems | Windows XP + Mac OS X 10.3 + |
| Focal length (35mm film equivalent) | 35 - 350 mm |
| Focus adjustment | Auto |
| Normal focusing range | 0.5 -?/1.2 -? m |
| Auto focusing (AF) modes | Continuous Auto Focus, Single Auto Focus |
| Macro focusing range (tele) | 0.6 - 1.3 m |
| Macro focusing range (wide) | 0.12 - 0.6 m |
| Normal focusing range (tele) | 1.2 - ∞ m |
| Normal focusing range (wide) | 0.5 - ∞ m |
| Light metering | Centre-weighted, Spot |
| ISO sensitivity | 100, 200, 400, 800, 1600, Auto |
| Light exposure modes | aperture priority AE, shutter priority AE |
| Flash modes | Auto, Fill-in, Flash off, Red-eye reduction |
| Flash range (tele) | 0 - 3.9 m |
| Flash range (wide) | 5.4 m |
| Internal memory | 32 MB |
| Compatible memory cards | SD, SDHC |
| Motion JPEG frame rate | 30 fps |
| Maximum video resolution | 640 x 480 pixels |
| Display diagonal | 2.5 \ |
| Display resolution (numeric) | 230000 pixels |
| USB version | 2.0 |
| Scene modes | Backlight, Beach, Candlelight, Children, Documents, Fireworks, Museum, Night landscape, Night portrait, Panorama, Portrait, Self-portrait, Snow, Sunset, Landscape (scenery) |
| Image editing | crop, trimming |
| Photo effects | Black&White, Neutral, Sepia |
| White balance | Auto, Daylight, Fluorescent, Shade, Tungsten |
| Camera playback | movie, single image, slide show |
| Self-timer delay | 10 s |
| Product color | Red |
| Battery type | AA |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 35.7 mm |
|---|---|
| Width | 107 mm |
| Height | 72.4 mm |
| Weight | 220 g |
| Dimensions (W x D x H) (imperial) | 4.2 x 1.4 x 2.9 \ |
Install software before connecting cables and follow on-screen instructions.
Insert batteries into the compartment.
Turn off camera, insert/remove card, then turn on camera.
Power on the camera.
Set language, date, and time using navigation buttons and OK.
Turn Mode dial to Smart Capture setting.
Press shutter halfway to focus, then fully to take picture.
Press Review button to enter/exit review mode.
Navigate through media or play videos using buttons.
Turn off camera, connect USB, turn on camera, follow software prompts.
Overview of capture modes: Smart Capture, Sport, Panorama, Scene, PASM, Video.
General picture taking—excellent image quality and ease of use.
Program, Aperture, Shutter, Manual modes for more creative control.
Record video with sound.
Turn Mode dial to Video, press Shutter button to record/stop.
Turn Mode dial to Scene, navigate, and select mode.
Frame subject, use T/W to zoom, take picture.
Use framing marks and adjust distance for focus.
Auto mode uses flash when needed.
Fill mode fires flash for every picture, useful for shadows.
Red-eye Reduction uses preflash or digital correction.
Press Focus button to select desired icon (AF, Infinity, Macro).
Press shutter halfway to focus/expose, then fully to take picture.
Set self-timer for 10s, 2s, or 2-shot delay.
Press shutter fully and hold to take up to 3 pictures.
Turn Mode dial to Panorama, select direction, press OK.
Take first picture, compose second, press OK to stitch 2 or 3 pictures.
Program mode: auto shooting with full menu access.
Aperture Priority mode: controls depth of field.
Shutter Priority mode: prevents blur for moving subjects.
Manual mode: highest level of creative control.
Adjust ISO for camera sensitivity to light.
Adjust flash brightness.
Adjust exposure to make pictures darker or lighter.
Control how long the shutter stays open.
Control lens opening size for depth of field.
Adjust exposure compensation before taking pictures to control brightness.
Combine exposure compensation and bracketing for best exposure.
Press Review to view media, use buttons for navigation.
Magnify pictures during review using '+' and navigation buttons.
Press Review, navigate, and press OK to play video.
Review, find, and delete pictures/videos using the Delete button.
Recover accidentally deleted pictures/videos immediately after deletion.
Protect pictures/videos from deletion via Review, Menu, Protect.
Caution: Formatting deletes all pictures/videos, protected files, tags, and favorites.
Install software by closing apps, inserting CD, and following prompts.
Caution: Install software before connecting camera.
Turn off camera, connect USB, turn on camera, follow software prompts.
Troubleshoot camera not turning on: check batteries.
Troubleshoot camera not turning off: remove/reinsert battery.
Troubleshoot corrupted pictures: retake, keep batteries charged, format card.
Troubleshoot shutter button not working: check power, storage, software.
Troubleshoot card recognition: buy certified card, format, insert correctly.
Troubleshoot camera freezing with card: turn off before insert/remove.
Troubleshoot transfer failure: disconnect USB, reinstall software.
Troubleshoot no computer communication: check power, cable, software.
Do not disassemble. Refer servicing to qualified personnel. Avoid hazards.
To Next Page