Using the advanced features
www.kodak.com/go/z8612support 21
Changing P, A, S, or M mode settings
1 Turn the Mode dial to P, A, S, or M.
2 Press to access available settings:
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller f-stop numbers indicate a larger lens opening; good for low-light.
■ Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Shutter speed—control how long the shutter stays open. (Use a tripod for slow
shutter speeds.)
Exposure Compensation—adjust the exposure. If the picture is too light, decrease
the setting; if it’s too dark, increase the setting.
Flash Compensation—adjust flash brightness.
ISO—adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity.
NOTE: A higher ISO may produce unwanted “noise” in a picture. ISO 3200 available only in 2.2 and lower
picture sizes.
ISO speedAperture
Shutter speed
Exposure compensation
Flash compensation
To Next Page
Loading...
Need help?
General
