Kodak EKTAGRAPHIC III - Slide Advancement and Focusing; Random Projection

KODAK EKTAGRAPHIC III Slide Projector 11
Operation
Forward and
Reverse
Press the forward button on the projector or the remote control to project the
first slide. To change slides, briefly press the forward or reverse buttons.
Focus Focus your first slide using the focus knob on the projector or the focus button
on the remote control.
Autofocus
(Models A, AMT,
and ATS only)
With autofocus on, the projector automatically focuses each slide, after you
focus your first slide manually. Turn autofocus off if glass slides make the
autofocus motor run continuously.
Random Projection For random projection of any slide in the
tray:
• press and hold down the
select bar,
• rotate thetrayto the desiredslide,
and
• release the select bar.