14 www.kodak.com/go/aiosupport
4
Safety and Warranty
Information
Safety Information
• Always follow all warnings and instructions marked on the
product.
• Use only the power source indicated on the product
regulatory label.
• Use only the power cord that comes with the product.
Using another power cord may cause fires and or shock.
Do not use the included power cord with any other
equipment.
• If you do not use this product for a long period of time,
unplug it from the electrical outlet.
• Always turn this product off by using the On/Off button.
Wait until the On/Off button stops flashing before
removing the power plug from the outlet.
• Do not allow the power cord to become damaged or
frayed.
• If you need to use an extension cord with this product,
make sure that the ampere rating of the product does not
exceed the ampere rating of the extension cord.
• Place the product on a flat, stable surface that extends
beyond the product’s base in all directions. This product
will not operate properly if tilted or at an angle.
• When storing or transporting this product, do not tilt or
stand it on its side. Never turn this product upside down
(ink can leak out of the product).
• Avoid placing this product in an environment that is
subject to rapid changes in temperature or humidity,
mechanical shocks, vibration, or dust. Do not place near
radiators, heating vents, or in direct sunlight.
• Leave enough room around this product for sufficient
ventilation.
• Do not block this product’s covers or openings, or insert
any objects through slots.
• Do not use aerosol products inside or around this product.
• Do not spill any liquid on this product.
• Do not attempt to repair or service this product.
To Next Page
Loading...
