33
Chapter 5
2
For the options with sliders, click and slide the indicator. For anti-flicker,
select the appropriate radio button.
The change is dynamically previewed in the live video display.
Options that are greyed out are inactive.
3
When you have made all your selections, click OK.
The Properties window closes and your changes are applied.
The Apply button accepts your changes but does not close the window.
Starting KODAK EZ200 Software
You launch the KODAK EZ200 Software through the photo imaging application of
your choice when you connect the camera to your PC with the provided USB
cable.
1
Connect the camera to your computer with the provided USB cable.
2
Press the Shutter button and select your imaging application.
The imaging application and EZ200 Software open.
For complete instructions on starting and using EZ200 Software with your camera,
see Chapter 4, Using Your EZ200 Camera as a PC Camera.
To Next Page
Loading...
