9
Look for this logo to be certain that the film
you buy is made for this camera.
Look for this logo to select a certified
photofinisher for developing your film and to
assure that you get all the features of the
Advanced Photo System.
• Make sure the Film Status
Indicator (FSI) on the film
cassette is at
●
(#1 position)
for a new cassette.
• Do not force the film
cassette into the film chamber.
3. Close the film door to start the
automatic film prewind. The
picture counter (20) on the LCD
panel (3) displays the number
of pictures remaining on
the film.
• After you close the safety-
interlocked film door and the
film starts to prewind, you
cannot open the door until
the film is completely
rewound into the film cassette.
To Next Page
Loading...
